Setting the Stage – Providing the Foundation

Here are several questions that are usually asked by safety and health professionals: “What are the skills that I need to have in order to be effective within my organization?,” “What foundational knowledge and experience do I need,” “What key concepts are essential for my success?,” “Do I have the transferable skills that will adapt to the organization,?” and “What am I expected to accomplish?” Perhaps even, “Why did the last person leave or fail to make an impact?” or “Why did the last person leave the position?”

Based on these questions, it is understood that a basic knowledge of safety and health regulations is a fundamental requirement. However, while one can build a career out of just complying with regulations, at some point in time you may feel that you are trapped in a cycle of just trying to meet the most current regulatory directives. Then you ask the question: “Is there something more that can be achieved?” and “What methods or tools can aid in developing a safety and health system or process that stands the test of time?”

We believe that the development of a safety and health process requires going beyond just developing or replicating off-the-shelf programs. By shifting focus to a more systemic approach, the potential for success can increase. What is needed is a way to anchor or embed various programs into a recognized methodology. In addition, a sense of direction and purpose must be established that provides a road map to follow. It our opinion that a three pronged approach should be considered:

  • Use of a process such as the American Nationals Standards Institute (ANSI) Z10-2005 or an equivalent systems (OSHA’s VPP, OHSAS 18001, etc.) as a basic framework and expand each system to meet the intent of the organization.
  • An understanding of basic regulatory requirements combined with in-depth risk and hazard identification and control concepts and techniques. One key element we believe is essential is the job hazard analysis (JHA). Its routine and comprehensive use allows for better assurance that programs developed are customized to meet specific organizational needs.
  • A Vision, Goal, and a Plan of what you want to accomplish. Having a defined vision and sense of purpose provides clarity and direction. Without a clear vision, one can become trapped in a cycle of activities that may meet short-term needs but will fade over the long haul.

A Process Structure – ANSI Z10-2005

Most of us do not have the time or resources to start a process from scratch. However, by implementing guidelines such as the “ANSI Z10-2005, Occupational Health and Safety Management System Standard,” you can better position your organization to, as the standard states: “establish and implement a process to set documented objectives, quantified where practicable, based on issues that offer the greatest opportunity for Occupational Health and Safety Management System improvement and risk reduction.” The ANSI Z10-2005 involves policy and process development covering 21 elements. It emphasizes the use of risk and hazard assessment and not just compliance. The standard follows a continuous improvement cycle of policy management, leadership, employee participation, planning, implementation and operation, checking and corrective action, and management reviews. These elements if implement properly become the overall framework for a successful safety process.

Regulatory Compliance – Individual Programs

Your primary objective is to get things done in your specific discipline. Your immediate objective may be to deploy resources to assure that the mandated legal requirements are maintained. In the United States, the Federal Occupational Safety and Health (OSHA) Act states that “Employers must furnish a place of employment free of recognized hazards that are causing or are likely to cause death or serious physical harm to employees.” The current OSHA format is written in a way that fragments the Safety and Health Process into a series of separate programs, although at this time, consideration is being given to establish an Injury and Illness Prevention Program requirement (I2P2).

Too many times we have observed this fragmentation where the safety and health function into being seen as the sole safety source, “the safety guy,” the go-to-person for everything and no management or supervision involvement or support.

Without an overriding process, a personality cult of safety develops. Programs appear to be working well and successfully implemented, yet when “the safety guy” leaves the organization; the program goes south and disappears rapidly. A new person is assigned or comes in and has to rebuild all the programs and the cycle continues again. Programs must have a guidance system and a defined process with procedures that can in turn manage the various programs and ensure that they are based on a solid management risk and hazard assessment system.

The bottom line is to define what your safety and health system is going to look like. Are you going to just be compliance with regulatory requirements or do you want to build a safety system that will last?

In part 2 we will discuss developing a “Vision,” “Mission or Goal”, and why you should develop a plan so that you know where you are going know.

Sources: “Job Hazard Analysis” by James Roughton and Nathan Crutchfield, ANSI AIHA Z10-2005, Occupational Health and Safety Management Systems assessment.


Source by James Roughton

Share Article:

Leave a Reply

Unlock the Power of SEO with the Top SEO Service Provider in Sri Lanka. Our experts deliver tailored strategies for businesses to soar higher in search rankings and dominate the online competition.

©2018 Shen e-Services (Pvt) Ltd. All Rights Reserved. SEO Services

Check The Feedback

Reach us on WhatsApp
1